OFFICIAL PRESS RELEASE: Pre and Post-Race Tech

Official Press Release:
Date: August 1st, 2012
From: TBRA Series Management
Items to be inspected with attention during pre-race and post-race tech are as follows:
In Pre-Race Tech:
- Referee
- Safety Equipment
- Tread Width
- Scale the Car
- Check the Carb Top and Booster
- Check that Tires are Unaltered, Marked Race Tires
- Complete Check of the MSD Box, Wiring, and Chip (chip drawn at random by driver in tech)
- Check the Motor for TBRA Series Seal # and Match to CamDoctor Report Information in TBRA Series Tech Logbook
- CamDoctor if Not Sealed
In Final Tech:
- Scale the Car (Top 3 finishers should have similar burn off, if there is a question the driver will be asked to top with fuel and re-scale for comparison to his/her pre-race scale weight and %)
- Complete Check of Carb and Spacer (no tapered hole spacers allowed)
- Check that Tires are Unaltered, Marked Race Tires
- Complete Check of the MSD Box, Wiring, and Chip (chip number must match chip drawn in pre-race tech and have TBRA Series Tamper Evident Seal in place and untampered)
- CamDoctor Test on Motors
Final Tech will proceed as follows: Top 5 Finishers are impounded immediately following the race - Top 3 finishers receive Post Race Tech Inspection rolling to 4th Place if one of the Top 3 finishers fails and rolling to 5th if two of the Top 4 fail in Final Tech). Failing any aspect of final tech will result in disqualification from the event. Please note disqualification from any of the remaining 3 scheduled events will result in elimination from the TBRA Series Points Chase.
Please direct comments and questions regarding the TBRA Series to:
Marketing Manager; Nick Fares @ 330-283-3900 or via email to N.W.Fares@gmail.com
Leave a Comment
2012 TBRA Series of Champions Sponsors
Series Technical Support
The TBRA Series would like to say a big thank you to Joe Caranci and CMP Raceshop for the Chassis Dyno Services they offer in support of the Technical Inspection Process Development Team for the TBRA Series. CMP Raceshop uses a state-of-the-art Mustang 1100 Chassis Dyno that offers real world loading for superior testing, analysis and tuning.

Official Brake Pad of 2012 TBRA Series
Hawk Performance has a full line of advanced brake pads using state of the art technology and testing in the development of their compounds. Whether you are seeking the best solution for Motorsports Racing, Street Performance, Truck/SUV, or Motorcycles Hawk Performance has the solution you are looking for.

Series Organizers & Supporting Tracks
Join Our Newsletter


















